Non-contractual photo
Price Rules
This piece is packaged in boxes of
25 units.
We apply a surcharge for deconditioning according to the following rules
| Quantity | Price |
|---|---|
| 25 piece(s) | 20.09208 € |
| 10 piece(s) | 29.13352 € |
| 1 unit | 32.48220 € |
M20 Type B Lindapter Medium Zinc plated white - LINDAPTER®
Référence TDI : LINB20MW
Price: 502.30 € Tax incl. for 25
In stock
Standard, solid-face clamp for quick connection of parallel-flange steel beams, with moderate tensile strength.
Specifications
Description :
Introduction :
The Type B clamp provides a quick connection system between two steel beams. It is often used in conjunction with Type A clamps. Thanks to its solid face, the bolt head or nut can rotate on a hardened washer; it can also be used with studs, tie rods and stirrups. The shoulder on the reverse side wedges itself to the edge of the beam flange, preventing the clamp from turning during installation. Type B clamps can also be used on their own if part of the metal structure has been pre-drilled.
Options and benefits :
- Solid face allows the bolt head or nut to be turned on a hardened washer.
- Ideal for parallel flanges.
- Supports up to 78.8 kN in tension in a four-bolt configuration.
Heel lengths and shims:
Available in three heel lengths - Short, Medium and Long - the clamp can be combined with Lindapter shims to increase the clamping range. Choose the combination of heel length and number of wedges to suit your wing thickness. For the selection table, download the data sheet below.
Positioning and end plates :
These plates ensure correct positioning of the clamps and bolts in relation to the support structure. Positioning plates are simple fabricated parts designed to be inserted between the two profiles to be joined, to ensure that the bolts are correctly centered when installed. End plates are simple fabricated parts that are pre-welded to support structures, brackets or profiles, to enable assembly to the support structure using standard Lindapter clamps. For further information, download the data sheet below.
Properties :
- Made of malleable cast iron to EN 1562 standard.
- Available in galvanized or hot-dip galvanized finish.
- Reaction to fire: A1 (Steel).
Technical Specification :
| Working loads (Safety factor 5:1) | Dimensions | ||||||||||
| Product code | Bolt 8.8 Z | Tension / 1 bolt | Sliding / 2 bolts | Tightening torque | Y | X | Heel length V | T | Width | ||
| kN | short | medium | long | ||||||||
| kN | Nm | mm | mm | mm | mm | mm | mm | mm | |||
| BO8 | M8 | 1 | - | 6 | 16 | 8 | - | 4 | - | 8 | 20 |
| B10 | M10 | 1.5 | - | 20 | 20 | 11 | 4 | 5 | 7 | 10 | 26 |
| B12 | M12 | 5.8 | 0.9 | 69 | 26 | 13 | 4.5 | 6 | 9.5 | 12 | 29 |
| B16 | M16 | 8.5 | 1.7 | 147 | 30 | 16 | 5.5 | 8 | 11 | 16 | 36 |
| B20 | M20 | 14.7 | 3 | 285 | 36 | 19 | 7 | 10 | 12.5 | 19 | 46 |
| B24 | M24 | 19.7 | 4.5 | 491 | 48 | 25 | 9 | 12 | 16 | 25 | 55 |
